Blue Sea Systems

Blue Sea Systems ST Glass 6-Circuit Fuse Block with Negative Bus and Cover Review

- Paladino Leave a comment

Blue Sea Systems ST Glass 6-Circuit Fuse Block with Negative Bus and Cover

  • Clear insulating cover with label recesses for accept Large Format Labels
  • Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses
  • Tin-plated copper buses and Phosphor Bronze fuse clips give 30 Ampere rating per circuit
  • Accepts AGC (Fast Acting), MDL (Time-Delay) and all other 3AG Glass Fuses

Size:one size

Fuse block, 3ag glass FUSE, 6 circuit, W/negative bus & cover, Mfg# 5015, 32VDC max W/30Amp per circuit & 100 amp per block, #10-32 screw terminal, 3.5″W x 5″H x 1.25″D. Fuses not included.

Blue Sea Systems Class T Fuse Blocks Review

- Paladino Leave a comment

Blue Sea Systems Class T Fuse Blocks

    This fits your .
  • Make sure this fits by entering your model number.

  • Voltage Max. Operating: 160V DC, Amps Max. Operating: 160A, Class T Fuses: 110A-200A, Mounting: 1/4″ (M6) Screws, Terminal Stud Size: 1/4″-20 (M6)
  • Four stud design provides ample access around connecting stud to install large cable lugs without obstruction from the fuse
  • Insulating cover satisfies ABYC/USCG insulation requirements. Ignition protected when cover is secure
  • Cover breakouts allow wire access in any direction
  • Stud design ensures secure fuse mounting even with high heat
  • Stainless steel studs provide resistance to corrosion and high torque
  • One-piece stainless flange nuts ensure safe and secure connections
  • Fuse sold separately

Blue Sea Systems ANL 35A to 750A Fuse Block with Insulating Cover Review

- Paladino Leave a comment

Blue Sea Systems ANL 35A to 750A Fuse Block with Insulating Cover

  • Cover included
  • Accepts 5/16″ (M8) ring terminals
  • For use on systems up to 32 Volts DC
  • Stainless steel studs provide resistance to corrosion and high torquing for excellent electrical contact
  • Base Material:Reinforced Polycarbonate
  • Maximum Cable Size:4/0 AWG

Size:one size

Cover included Accepts 5/16″ (M8) ring terminals Push-to-reset operation “Trip Free” design cannot be held “ON” during fault current condition.

Blue Sea Systems EasyID ATC Fuses Review

- Paladino Leave a comment

Blue Sea Systems EasyID ATC Fuses

    This fits your .
  • Make sure this fits by entering your model number.

  • 3 x 3A, 3 x 5A, 3 x 7.5A, 3 x 10A, 6 x 15A, 3 x 20A, 3 x 25A, 3 x 30A, 3 x 40A, 30 fuses total
  • EasyID illuminated ATC blade fuses use LED technology to show that a fuse has blown, making them easy to spot no matter the mounting location
  • Replaces non illuminating ATO or ATC fuses
  • Push-to-reset operation
  • “Trip Free” design cannot be held “ON” during fault current condition

Blue Sea Systems ANL Fuses Review

- Paladino Leave a comment

Blue Sea Systems ANL Fuses

    This fits your .
  • Make sure this fits by entering your model number.

  • Package of 1, 500A ANL Fuse, Max Voltage: 32V DC
  • Ignition protected (conforming to SAE J1171)- safe for installation aboard gasoline powered boats (35-500 Amp only)
  • 6,000 Ampere Interrupt Capacity (AIC) at 32V DC satisfies ABYC requirements for main DC circuit protection on large battery banks
  • Silver-plated connector blades for corrosion resistance
  • Visible indication of blown condition

Blue Sea Systems Short Stop Circuit Breakers 10 Amp – 50 Amp Review

- Paladino Leave a comment

Blue Sea Systems Short Stop Circuit Breakers 10 Amp - 50 Amp

    This fits your .
  • Make sure this fits by entering your model number.

  • Use a circuit breaker instead of a fuse
  • Designed with corrosion resistant materials to withstand harsh environments
  • IP64 water resistant boot protects against dust and splashing water
  • Push-to-reset operation only disconnects when tripped
  • Stainless steel nyloc nuts for secure connections

Blue Sea Systems C-Series Single Pole Rocker Circuit Breakers Review

- Paladino Leave a comment

Blue Sea Systems C-Series Single Pole Rocker Circuit Breakers

    This fits your .
  • Make sure this fits by entering your model number.

  • Compatible with AC and DC systems for the stated amperage
  • Rocker actuator is flush in the “ON” position, eliminating the risk of accidental switching
  • Flush in the “On” position
  • Circuit breakers will trip all poles if any one pole trips
  • “Trip Free” design cannot be held “ON” during fault current condition

Blue Sea Systems 187-Series Surface Mount 35A Circuit Breaker Review

- Paladino Leave a comment

Blue Sea Systems 187-Series Surface Mount 35A Circuit Breaker

    This fits your .
  • Make sure this fits by entering your model number.

  • Combines switching and circuit protection into a single device
  • Clear, single lever operation
  • “Trip Free” design cannot be held “ON” during fault current condition

Scroll To Top