Blue Sea Systems Maxi Inline Fuse Holder Review

Blue Sea Systems Maxi Inline Fuse Holder

  • Supplied with 5 inch #6 Red lead Wire and two adhesive lined sealing shrink wrap tubes
  • FIRE wall surface mounting Hole permits two or more Holders to be mounted together
  • Protective cover with retaining strap
  • Fuse sold separately

Size:one size

Quickly add in-line circuit protection with higher Amperage maxi fuses. Rated for up to 48A maximum continuous Amperage.

Blue Sea Systems AMI/MIDI Safety Fuse Block Review

Blue Sea Systems AMI/MIDI Safety Fuse Block

    This fits your .
  • Make sure this fits by entering your model number.
  • Ignition protected for installation aboard gasoline or diesel powered boats
  • Sealed cover protects fuses from the harsh marine environment
  • Insulating cover satisfies ABYC/USCG insulation requirements

Blue Sea Systems Class T Fuses Review

Blue Sea Systems Class T Fuses

    This fits your .
  • Make sure this fits by entering your model number.
  • Package of 1, 300A 160V DC Class T Fuse
  • Recommended by most inverter manufacturers
  • Extremely fast short-circuit response
  • 20,000 Ampere Interrupt Capacity (AIC) for large battery banks including Lithium-ionand TPPL batteries
  • UL listed standard 248-15

Blue Sea Systems ST CLB Circuit Breakers Review

Blue Sea Systems ST CLB Circuit Breakers

    This fits your .
  • Make sure this fits by entering your model number.
  • Max Voltage: 32V DC, Max Amp: 32A (Per Circuit), Max Amp: 100A (Per Block – Common Source)
  • Quick connect clips allow circuit breakers to snap easily into place
  • Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements
  • Tin-plated copper busses and screw terminals. Accepts ring terminals
  • Breakouts allow wire access in two directions

ST CLB Circuit Breaker Block – 12 PositionFeaturesQuick connect clips allow circuit breakers to snap easily into placeTin-plated copper busses and screw terminalsClear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirementsEasy to open clip on coverBreakouts allow wire access in two directionsAccepts ring terminalsOptional push button waterproof boots or dress nuts can be installed over coverSpecifications:Circuits:12Maximum Amperage:32A (per circuit) 40A (per jumped circuit group)Maximum Voltage:32V DCMounting:#8 Screw (M4) or #8 NutSource:Independent SourceMinimum Operating Temperature:-10 CMaximum Operating Temperature:60 CMounting Centers:10.13″(257.3 mm)Screw Terminal Type:#8-32 Screws with Captive Star Lock WasherHeight:6.69″(169.93 mm)Weight:1.50lb (0.68 kg)

Blue Sea Systems 187-Series Panel Mount 135A Circuit Breaker Review

Blue Sea Systems 187-Series Panel Mount 135A Circuit Breaker

  • Combines switching and circuit protection into a single device
  • Clear, single lever operation
  • IP-66 rated Waterproof
  • Recessed mounting holes for clean appearance

Size:One Size

Combines switching and circuit protection into a single device Clear, single lever operation IP-66 rated Waterproof.

BLUE SEA SYSTEMS 5035 / Blue Sea 5035 ST Blade Fuse Block w/Cover – 6 Circuit Independent w/o Negative Bus Review

BLUE SEA SYSTEMS 5035 / Blue Sea 5035 ST Blade Fuse Block w/Cover - 6 Circuit Independent w/o Negative Bus

ST Blade Fuse Block With Cover – 6 Circuit without Negative Bus
Part# 5035

  • Can be used for 24-hour circuits
  • Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems’ Small Format Labels for circuit identification
  • Fuse blocks with covers include 20 write-on circuit labels
  • Tin-plated copper buses and fuse clips
  • Accepts ring or spade type terminals
  • Accepts ATO® and ATC® fast acting blade fuses
  • Fuses sold separately

Blue Sea 5025 ST Blade Fuse Block w/Cover – 6 Circuit w/Negative Bus Review

Blue Sea 5025 ST Blade Fuse Block w/Cover - 6 Circuit w/Negative Bus

5025ST Blade Fuse Block With Cover6 Circuit with Negative Bus Clear insulating cover with label recesses accept Small Format Labels Cover Satisfies ABYC/USCG requirements for insulation Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit Accepts ATO and ATC fast acting blade fuses 20 write-on circuit labels included Specifications: Box Dimensions: 2″H x 4″W x 8″L WT: 0.6 lbs UPC: 632085050252 Owner’s Manual (pdf)

Blue Sea Systems MEGA/AMG Fuses Review

Blue Sea Systems MEGA/AMG Fuses

    This fits your .
  • Make sure this fits by entering your model number.
  • Economical fuse for 100-300 Ampere circuit protection
  • For use with Blue Sea Systems’ MEGA/AMG Fuse Block
  • Use with part number 5006

Blue Sea Systems C-Series Triple Pole Toggle Circuit Breakers Review

Blue Sea Systems C-Series Triple Pole Toggle Circuit Breakers

    This fits your .
  • Make sure this fits by entering your model number.
  • Max Voltage: 250V AC, Interrupt Capacity: 5,000A @ 125V AC, 5,000A @ 250V AC
  • Frequently used for 120/240 Volt AC circuit protection
  • Can be used as 120/240 Volt AC Main circuit breaker to switch both lines (hots) and neutral
  • Will trip all poles if any one pole trips

Scroll To Top