The MC1224B1100ESC is a 100 Amp rated meter-load center combination rated for use in utility areas that require the EUSERC standards be followed. A 100 Amp main breaker is installed along with a 12 space, 24 circuit interior. The enclosure is surface mount, NEMA 3R (outdoor) rated and is fabricated from Galvanized steel with a baked on polyester powder coating finish. The meter cover is ring type and the ring is provided. The panel is rated for overhead or underground feed applications. For overhead feed, use the Electric enter “RX” class of hubs (EC38594, EC38595, EC38596, EC38597, EC38598, EC38599, or EC38600). For bottom feed applications, use Electric enter “HC” class of hubs (ECHC200, ECHC250, ECHC300).

Product Description

Siemens introduces PL Series Load Centers – a new high quality and feature-rich line of load center products to meet applications for virtually every need. The PL Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PL load centers feature the patented insta-wire neutral/ground system, convertibility, copper bussing, and mounting tabs on the trim – these features were specifically engineered to decrease installation time and increase flexibility.

From the Manufacturer

Siemens PL series of Load Centers is a premium, feature rich design. The Load Center is single phase, 120/240 Volt, 20 space, 20 circuit and is provided with a factory installed 100 Amp Main breaker, an outdoor rated enclosure, and Copper Bus Bars. There is no need to purchase ground bars as they come standard in the PL series of Load Centers.

Siemens all new Unit-PAK Metering offers maximum flexibility and ease of installation to meet the service requirements of multiple position metering projects. The outdoor/indoor rated devices are available in 2-6 gang set-ups which consist of a pull section with main lugs or stud terminations and 4/5 jaw meter sockets with tenant main circuit breaker provisions. The units operate on 120/240V AC 1O- 3W systems and are available with either 125 or 200 ampere meter sockets to meet a wide variety of small apartment and commercial building applications. A fifth jaw accessory kit is available for use on 120/208YV AC 1O-3W network systems. The attractive Unit-PAK devices accept overhead or underground service terminations and are designed for wall-hung surface or semi-flush mounting. The devices are factory pre-bussed in a compact enclosure to ensure ease of handling and installation and to maximize wall-space efficiency. Features and ratings include: 1) Siemens’ exclusive 200 ampere/position QS breaker for quicker wiring, 2) Removable knock-out plate for back exit, 3) Mounting rail for wall hanging, 4) UL Listed for Service Equipment, 5) UL Listed for use with 60/75 Degree wire, 6) UL Listed for short circuit ratings up to 100,000 RMS symmetrical amps at 240V AC, 7) Front accessible 4 or 5-jaw sockets with individual ring or ring less type meter covers, 8) All unmetered bus is barbered and sealable to prevent unauthorized access, 9) Fifth jaw field installable at 6 or 9 o’clock, 10) Lever Bypass models, 11) Galvanized steel with electrodeposited paint provides uniform coverage for long-lasting protection and sharp appearance.

Siemens Meter Main and Meter Load Center Combination provides a full range of Meter Combination Load Centers and Meter Mains that are built for safety ease of installation and long term quality. A 200 Amp main breaker is installed along with a 20 space, 40 circuit interior. The enclosure is flush mount, NEMA 3R (outdoor) rated and is fabricated from Galvanized steel with a baked on polyester powder coating finish. The enclosure is designed to fit between standard 16″ centered studs. The meter cover is ring type and the ring is provided. This panel is rated for over head service feed only.