- Make sure this fits by entering your model number.
- QO 30 Amp three-pole circuit breaker
- Plug-on design, easy to install
- Compatible with QO load centers, CSED’s and NQOD panel boards
- Rated for 240 VAC and 10,000 AIR
Siemens type QP three pole breaker is rated for 25 Amps and 120/240 Volts. This breaker has a 10 KAIC interrupt rating and is for use in Siemens panels only. The breaker is plug in style. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
for cutler hammer ch series panel 2 pole 50 amp gfci breaker
Murray space saving, plug in circuit breakers are intended for use in Murray load centers and meter combinations that are rated to accept type MH-T breakers. Check wiring diagram to confirm. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required. The triplex breakers provide two single pole and one double pole breakers in half the space. These triplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.
Murray space saving, plug in circuit breakers are intended for use in Murray load centers and meter combinations that are rated to accept type MH-T breakers. Check wiring diagram to confirm. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required. The triplex breakers provide two single pole and one double pole breakers in half the space. These triplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.
‘ Plug In Circuit Breaker, Amps 15/20, Number of Poles 1, Circuit Breaker Type Tandem, AC Voltage Rating 120/240VAC, DC Voltage Rating Not Rated, For Use With QO Load Centers and NQOD Panelboards, Series QOT, Terminal Connection Screw Clamp, Min. Wire Size 14 AWG, Max. Wire Size 8 AWG, Length 3.00 In., Width 0.75 In., Depth 2.91 In., Standards UL Listed , CSA Certified, Max. AIR Rating 10kA ‘
2 30A Double Pole Circuit Breaker, Quadplex, In 2″ Case, 120/240V, With Individual UPC Bar Code, Bulk.
Murray offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Murray offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.
Murray plug in circuit breakers are intended for use in Murray load centers or meter combinations. The double pole Murray breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required.
Murray offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Murray offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.
Murray plug in circuit breakers are intended for use in Murray load centers or meter combinations. The double pole Murray breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required.