GE, 20a, single pole, arc fault circuit breaker, 120V, 1 inch space required, Carded. Manufactured in china.
Shunt trip breakers operate with the same functionality of a standard type breaker providing over current and short circuit protection, as well as switching capability. The shunt trip breakers provide an additional function in that it can be tripped remotely through the use of a built in magnetic coil that can be energized to trip the breaker. Each shunt trip breaker will have an additional 1-Inch pole attached to it to house the magnetic coil. The additional pole does not plug onto and is not energized by the bus bar. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
Detects when current is “leaking” somewhere outside its intended path. Should the DFCI trip, the yellow LED Indicates the last known trip condition by illuminating LED for 5 seconds each time the DFCI is turned on for up to 30 days. Self-test feature. UL Listed. 3.3″ height x 1″ width x 3″ depth, .479 lb.
Siemens AFCI plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The single pole Siemens breakers may be used in single or 3-phase load centers and are 120V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The combination type AFCI is for use in areas enforcing the 2008 or newer National Electric Code. Check with your local electrical inspector to confirm. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
SIEMENS AFCI plug in circuit breakers are intended for use in SIEMENS EQ, SIEMENS Ultimate, ITE, and Gould load centers or meter combinations. The single pole SIEMENS breakers may be used in single or 3-phase load centers and are 120V rated. To ensure the warranty on a SIEMENS panel is not voided, the use of SIEMENS breakers is required. The combination type AFCI is for use in areas enforcing the 2008 or newer National Electric Code. Check with your local electrical inspector to confirm.
Eaton CHFCAF120PN Plug-In Mount Type CH Combination Arc Fault Circuit Breaker 1-Pole 20 Amp 120 Volt AC Fire-Guard®