Square D Miniature Circuit Breaker, 120/240 VAC, 30 A, 50/60 Hz, 10 kA Interrupt, QO Frame, Thermal Magnetic Trip, 2 Pole, 1 Phase, Pressure Plate, 14 to 10 AWG/14 to 8 AWG Wire, Plug-On Mount, 40 deg C, 1.5 in W x 2.91 in D x 3 in H
1- Federal pacific/Challenger NA230 Stab-LokCircuit Breaker, 2-Pole 30-Amp Thick Series
This 120/240 volt Federal Pacific Electric 30 amp, double pole, thick series replacement circuit breaker is used in a Federal Pacific load center. Typical applications, up to 8,800 watts, include electric baseboard heat, fan forced heat and 240 volt air conditioners (up to 23,000 BTU). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.
Mfr Brand Name: CUTLER HAMMER / Catalog No.: BAB2040 / Product Name: CUTLER HAMMER BAB2040 N 40A 240V 2P NEW / Amps: 40 / Volts: 240 / Poles: 2 / AIC: 10
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The triplex breakers provide two single pole and one double pole breakers in half the space. These triplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
SIEMENS space saving, plug in circuit breakers are intended for use in SIEMENS EQ, SIEMENS Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a SIEMENS panel is not voided, the use of SIEMENS breakers is required. The triplex breakers provide two single pole and one double pole breakers in half the space. These triplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.
Plug In Circuit Breaker, Amps 80, Number of Poles 2, Circuit Breaker Type Standard, AC Voltage Rating 120/240VAC, DC Voltage Rating 48VDC, For Use With QO Load Centers and NQOD Panelboards, Series QO, Terminal Connection Box Lug, Min. Wire Size 4 AWG, Max. Wire Size 2/0, Length 3.00″, Width 1.5″, Depth 2.91″, Standards UL, CSA, HACR, AIR @ 120VAC 10kA, AIR @ 240VAC 10kA, AIR @ 48VDC 5kAWARNING: California ResidentsThis product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Mfr Brand Name: CUTLER HAMMER / Catalog No.: CH150 / Product Name: CUTLER HAMMER CH150 BN 50A 120V 1P 10K NEW / Amps: 50 / Volts: 120 / Poles: 1 / AIC: 10
This 120 volt Cutler Hammer “CH” 50 amp, single pole replacement circuit breaker is used in a Cutler-Hammer load center. Typical applications, up to 3,600 watts, include well pumps (up to 200′), bathroom heaters and electric motors (1-1/2 hp to 2 hp). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.