- Make sure this fits by entering your model number.
- Mexico
Siemens introduces PL Series Load Centers – a new high quality and feature-rich line of load center products to meet applications for virtually every need. The PL Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PL load centers feature the patented insta-wire neutral/ground system, convertibility, copper bussing, and mounting tabs on the trim – these features were specifically engineered to decrease installation time and increase flexibility.
Siemens PL series of Load Centers is a premium, feature rich design. The Load Center is single phase, 120/240 Volt, 40 space, 40 circuit and is provided with a factory installed 200 Amp Main breaker, an outdoor rated enclosure, and Copper Bus Bars. There is no need to purchase ground bars as they come standard in the PL series of Load Centers.
Siemens 200 Amp, single phase, 120/240 Volt, 30 space, 40 circuit Main Lug Load Center is provided with a combination Surface/flush mount cover, and Aluminum Bus Bars.
Testing GFCIs on a monthly basis is a good idea that is sometimes forgotten. Underwriters laboratories (UL) suggests that GFCI Devices be tested every 30 days after installation to ensure they are properly working. Now the new self-test & lockout feature enables the GFCI to automatically and continuously test itself to ensure that it is working properly. If it is detected that the device has been compromised, the device trips itself and locks out the device, reducing the possibility of the homeowner incorrectly assuming that the device was tripped to prevent a ground fault. This effortless system guarantees that only the best protection is given to your home at all times. The self test and lockout feature meets NEC 2014 requirements.
Highlights: Type N1 indoor enclosure. Invertible – top/bottom feed 30 spaces, 30 circuits Height : 30″ NEMA type 1. 14.25 width x 3.88 depth Single phase, 3 wire, 22K A/C main breaker factory installed Aluminum bus bar, tin plated ANSI 61 gray powder coated Suitable for use as service equipment when main breaker is installed or when not more than six main disconnecting means are provided Convertable from main breaker to main lug
Siemens single phase, 120/240 Volt, 30 space, 30 circuit Load Center is provided with a factory installed 150 Amp Main breaker, a combination Surface/flush mount cover, and Aluminum Bus Bars.
The Siemens BL Circuit Breaker is a panelboard mounted, non-interchangeable trip molded case circuit breaker available in 10-125A, 1-, 2-, and 3-pole. Available in 10KAIC, 22KAIC and 65KAIC interrupting ratings. Also, available are arc-fault, ground-fault and switching neutral breakers. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
Siemens introduces PL Series Load Centers – a new high quality and feature-rich line of load center products to meet applications for virtually every need. The PL Series load center provides maximum flexibility in combination with labor saving features to aid the contractor while installing the product. PL load centers feature the patented insta-wire neutral/ground system, convertibility, copper bussing, and mounting tabs on the trim – these features were specifically engineered to decrease installation time and increase flexibility.
Siemens PL series of Load Centers is a premium, feature rich design. The Load Center is single phase, 120/240 Volt, 20 space, 30 circuit and comes with a factory installed 150 Amp Main breaker, a combination Surface/flush mount cover, and Copper Bus Bars. There is no need to purchase ground bars as they come standard in the PL series of Load Centers.
Q 20 Amp, 120V, Circuit Breaker, Siemens Q120AF, Q 20A | aka: ITE Q120AF, ITE Siemens Q120AF, UPC:783643174269