Murray

MP320 20-Amp Three Pole Type MP-T Circuit Breaker Review

- Paladino Leave a comment

MP320 20-Amp Three Pole Type MP-T Circuit Breaker

    This fits your .
  • Make sure this fits by entering your model number.

  • Three pole, 20 Amp, 240V type MP-T Circuit Breaker
  • 10,000 AIC interrupting rating
  • Murray type MP-T circuit breakers provide easy plug-in connections in Murray enclosures and the time saving insta-wire feature
  • Compatible with Murray rock solid load centers
  • Use for overload and short-circuit protection of your electrical system

› See more product details

Murray offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Murray offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.

Murray MP1515 Two 15-Amp Single Pole 120-Volt Non-Current Limiting Circuit Breaker Review

- Paladino Leave a comment

Murray MP1515 Two 15-Amp Single Pole 120-Volt Non-Current Limiting Circuit Breaker

    This fits your .
  • Make sure this fits by entering your model number.

  • The product is good to use
  • The product is of high quality
  • Manufactured in China

› See more product details

Product Description

Murray space saving, plug in circuit breakers are intended for use in Murray load centers and meter combinations that are rated to accept type MH-T breakers. Check wiring diagram to confirm. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces. The non-current limiting breakers are designed for use in Murray panels manufactured prior to 1968. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.

From the Manufacturer

Murray space saving, plug in circuit breakers are intended for use in Murray load centers and meter combinations that are rated to accept type MH-T breakers. Check wiring diagram to confirm. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces. The non-current limiting breakers are designed for use in Murray panels manufactured prior to 1968.

Murray MP220GFA 20 Amp 2-Pole GFCI Circuit Breaker with Self Test & Lockout Feature Review

- Paladino Leave a comment

Murray MP220GFA 20 Amp 2-Pole GFCI Circuit Breaker with Self Test & Lockout Feature

    This fits your .
  • Make sure this fits by entering your model number.

  • Double pole, 20 Amp, type MP-GT2 GFCI Circuit Breaker
  • 10,000 AIC interrupting rating
  • Includes self-test as required by UL 943 as an added safety feature
  • Suitable for a variety of construction applications including spas, hot tubs, kitchens, bathrooms, etc.
  • Provides class A GFCI protection

› See more product details

Murray MPD2175 10 kaic rated 175-Amp Plug In Breaker Review

- Paladino Leave a comment

Murray MPD2175 10 kaic rated 175-Amp Plug In Breaker

    This fits your .
  • Make sure this fits by entering your model number.

  • UL Listed breaker
  • 10 KAIC rated
  • For use when the breaker is mounted vertically
  • UL Type MD-T

› See more product details

Murray MD breakers take up four 1-Inch spaces and are intended for use in Murray or Crouse Hinds load centers, meter combinations, and multi-family metering where specified. Check the panel wiring diagram to confirm acceptance of this breaker type. This breaker is intended for use when the breaker is mounted vertically. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.

Murray MP240GFA 40 Amp 2-Pole GFCI Circuit Breaker with Self Test & Lockout Feature Review

- Paladino Leave a comment

Murray MP240GFA 40 Amp 2-Pole GFCI Circuit Breaker with Self Test & Lockout Feature

    This fits your .
  • Make sure this fits by entering your model number.

  • Double pole, 40 Amp, type MP-GT2 GFCI Circuit Breaker
  • 10,000 AIC interrupting rating
  • Includes self-test as required by UL 943 as an added safety feature
  • Suitable for a variety of construction applications including spas, hot tubs, kitchens, bathrooms, etc.
  • Provides class A GFCI protection

› See more product details

Murray ground fault circuit Interrupters (GFCI) breakers are designed to protect personnel from dangerous electrical current. The GFCI circuit breaker will de-energize the circuit when current is flowing along an unintended path such as water. This breaker is intended to protect areas of the home such as the kitchen, bathroom or laundry room where electrical appliances or products might come into contact with water

Murray MPP2175 120/240-Volt 4-pole type MPP 175-Amp Main Breaker Review

- Paladino Leave a comment

Murray MPP2175 120/240-Volt 4-pole type MPP 175-Amp Main Breaker

    This fits your .
  • Make sure this fits by entering your model number.

  • UL Listed breaker
  • 10 KAIC rated
  • For use in multi-family metering products
  • UL Type MPP

› See more product details

Siemens type MPP, MPP-HT, and MPP-MT breakers are intended for use in Murray panels and multi-family metering products where specified. Check the panel’s wiring diagram for acceptance. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.

Murray MP115AFC 15-Amp 1 Pole 120-Volt Combination Type Arc Fault Circuit Interrupter Review

- Paladino Leave a comment

Murray MP115AFC 15-Amp 1 Pole 120-Volt Combination Type Arc Fault Circuit Interrupter

    This fits your .
  • Make sure this fits by entering your model number.

  • Combination type AFCI
  • 1 Pole
  • Plug in type
  • 15-Amp
  • UL listed

› See more product details

Product Description

Murray AFCI plug in circuit breakers are intended for use in Murray load centers or meter combinations. The single pole Murray breakers may be used in single or 3-phase load centers and are 120V rated. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required. The branch feeder type AFCI is for use in areas enforcing the 2002 and 2005 National Electric Code. Check with your local electrical inspector to confirm. Murray strongly recommends against the use of “used” breakers.  The installation of used breakers in a Murray panel will void the warranty on the panel.  Murray does not sell used breakers and has not approved any 3rd party sellers to do so.

From the Manufacturer

Murray AFCI plug in circuit breakers are intended for use in Murray load centers or meter combinations. The single pole Murray breakers may be used in single or 3-phase load centers and are 120V rated. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required. The branch feeder type AFCI is for use in areas enforcing the 2002 and 2005 National Electric Code. Check with your local electrical inspector to confirm.

MP350 50-Amp Three Pole Type MP-T Circuit Breaker Review

- Paladino Leave a comment

MP350 50-Amp Three Pole Type MP-T Circuit Breaker

    This fits your .
  • Make sure this fits by entering your model number.

  • Three pole, 50 Amp, 240V type MP-T Circuit Breaker
  • 10,000 AIC interrupting rating
  • Murray type MP-T circuit breakers provide easy plug-in connections in Murray enclosures and the time saving insta-wire feature
  • Compatible with Murray rock solid load centers
  • Use for overload and short-circuit protection of your electrical system

› See more product details

Murray offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Murray offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.

MURRAY ECLX072M Ground Bar Kit with 15 Terminal Positions Review

- Paladino Leave a comment

MURRAY ECLX072M Ground Bar Kit with 15 Terminal Positions

    This fits your .
  • Make sure this fits by entering your model number.

  • 11 small and 4 large terminal openings
  • Small openings accept a wire range of No.14-6 CU/AL
  • Large openings accept a wire range of No.14-1/0 CU/AL

› See more product details

Murray MPD2150 150-Amp 2 Pole 240-Volt Circuit Breaker Review

- Paladino Leave a comment

Murray MPD2150 150-Amp 2 Pole 240-Volt Circuit Breaker

    This fits your .
  • Make sure this fits by entering your model number.

  • The double pole Murray breakers may be used in single or 3-phase load centers
  • 240V rated
  • Murray plug in circuit breakers are intended for use in Murray load centers or meter combinations
  • UL listed

› See more product details

Product Description

Murray plug in circuit breakers are intended for use in Murray load centers or meter combinations. The double pole Murray breakers may be used in single or 3-phase load centers and are 240V rated. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required. Murray strongly recommends against the use of “used” breakers. The installation of used breakers in a Murray panel will void the warranty on the panel. Murray does not sell used breakers and has not approved any 3rd party sellers to do so.

From the Manufacturer

Murray plug in circuit breakers are intended for use in Murray load centers or meter combinations. The double pole Murray breakers may be used in single or 3-phase load centers and are 240V rated. To ensure the warranty on a Murray panel is not voided, the use of Murray breakers is required.

Scroll To Top